Automatic Corrugated Carton Production Line Machine-WJ180-1800-Ⅲ 7 Ply

WJ180-1800-Ⅲ 7 Ply Corrugated Cardboard Production Line is full automatic corugated carton production line, which can produce corrugated carton automatically. As most normal packaging material in life, corrugated carton and box are produced in mass-production, so the high speed automatic corrugated carton production line is the best choice for corrugated carton plant.

WJ180-1800-Ⅲ 7 Ply Corrugated Cardboard Production Line produces corrugated carton from kraft paper reel to corrugated carton blanks, and flexo printing machine is to do subsequent process. For corrugated carton packaging companies, the automatic corrugated cardboard production line produce 3/5/7 ply corrugated cardboard at first , then slit into required size of carton blanks , the feed them into flexo prinitng machine , printing graphics on the surface ahieving the demand of customers.

Main technical parameter

Model : WJ180-1800-Ⅲ
Corrugated Line Length : About 100 meters
Design Speed :180m/min
Economic Speed: 3 Ply 120-150m/min, 5 Ply 90-130m/min, 7 Ply 70-110m/min
Working Width: 1800mm
Corrugated Fluting: UV look like V type A flute C flute B flute E flute (choose the flute as you need)
Steam Pressure: 0.8-1.2Mpa
Air Compression: 0.6-1.0Mpa
Total Power: Approximately 320Kw
Direction of Operating: customer decides

No Name Quantity Description
1 YZJ1-1800 hydraulic mill roll stand 7 Sets Clip the paper , move left and right , lift up and down adopt hydraulic drive , the tension control adopts the single points brake. Clip the paper adopts inflated collect.
2 SZ-1800 trolley and rail 14 Sets The rail is 6 meters long
3 DW1-1800 Single Facer 3 Sets Corrugated flute A/C/B/E flute, it is confirmed as the customer parameter.No past fork negative pressure absorption type. universal shaft coupling independent gear drive, corrugated roller diameter is Φ320mm, the surface is hard chromed.Both the up and down corrugated roller seat are whole installation. Pasting glue roller seat can slide out as a unit. Quantity of cement adopts electric micro adjustment with a touch screen display. automatic track the corrugated line speed to adjust the glue thickness device.All electric part (low voltage electric part,inverter, PLC ) adopts Schneider.
4 XY1-1800 core medium Pre-heater 3 Sets The preheater diameter is Φ900mm. Electric adjustment for the heating area,the adjusting range is 60°~280°. The preheater cylinder driving by reducing speed motor.
5 MY1-1800 surface paper Pre-heater 3 Sets The preheater diameter is Φ900mm. Electric adjustment for the heating area,the adjusting range is 60°~280°. The preheater cylinder driving by reducing speed motor.
6 DY1-1800 Quadruple Pre-Heater 1 Set The preheater diameter is Φ900mm. Electric adjustment for the heating area,the adjusting range is 60°~280°. The preheater cylinder driving by reducing speed motor.
7 TJ2-1800 Triple Pasting Glue Machine 1 Set Roller pressure type, the height of the pressure roller adopt electric adjustment with pneumatic control , the thickness of the glue roller adopt electric micro adjustment with human machine interface. It adopts frequency independent control. It is equipped with break paper automatic detection unit , speed synchronous control match speed module ,the thickness of the glue adopt automatic control.
8 GQ3-1800 Triple Overhead Convey Bridge 1 Set The lifting department adopt independent drive, automatic synchronous running, it adopt automatic aligner and automatically adjust paperboard neatly, on the bridge and ground two sets control.
9 SM3-1800 Double Facer 1 Set 20 heating plates , the surface of the machine is grinding, adopts concentrated gravity roller press,pneumatic section adjustment , hydraulic automatic lifting . The cotton belt adopts pneumatic tensioning , the upper belt adopts automatic correcting the error , the under cotton belt adopts manual adjustment. The temperature of the heating plate shows in three position (former,middle,back) , the frequency motor with variable frequency control from Taiwan.
10 ZQY-1800 NC Slitter Machine 1 Set Slitting and scoring adopt inverter controlled with the synchronize speed of corrugated line, five slitters and eight scorers,arrange orders and sharpening knives automatically controlled by computer,adopt three kinds of slitting size and adjustment of gap automatically with electric conversion.Control system and electrical components from Taiwan.
11 HQ2-1800 NC Rotary Cutting Off Machine 1 Set Servo motors imported from Italy,stored multiple groups of order,changed without stopping machine automatically or manually, feeding and sending blanks adopt frequency control,tracking the production speed automatically.Control system and electrical components from Taiwan.
12 DM1-1800 Manual Counting Stacker 1 Set Two sections of belt structure transfer vertically, tracking the production speed automatically. Manual counting and 90 degrees turning.
13 ZG -Ⅲ Steam System 1 Set Supply steam to each machine and dewater independently,unified backwater.
14 ZJX -ⅢGlue Making & Recycling System 1 Set Each using glue unit and glue storage unit adopt diaphragm pump automatically recycle
15 KY-ⅢAir Compressor System 1 Set Adopt two air compressors,one 1.0m3 air container and air filter to supply air, 2 0.9m³/min air compressors are supplied by customer.
16 DK3-ⅢElectric Control System 1 Set All electric components are from Schneider / Delta / Fatek these famous brands.The main drive motors adopt inverter control.The amount of glue and speed controlled by PLC,adjusted and displayed on touch screen.The corrugated line is equipped with display shows speed and operating condition all time.