Corrugated Cardboard/Paperboard Production Line-WJ150-1400 5 Ply

WJ150-1400 5 Ply Corrugated Cardboard Production Line is a production line to produce corrugated paperboard consist of a series of process machines. Corrugated cartons , boxes and containers are the most normal packing material in our life, and to produce them, after a series of process the wood becomes pulp, then the pulp is made into paper, at last multiple layer paper are made into corrugated board. So our corrugator machinecorrugated paperboard production line is the important process to produce corrugated board.

WJ150-1400 5 Ply Corrugated Cardboard Production Line

WJ150-1400 5 Ply Corrugated Cardboard Production Line

WJ150-1400 5 Ply Corrugated Cardboard Production Line is totally designed by Shengli Carton Equipment Group, adopt the advanced Control System from Taiwan, and the core machines : single facer, NC slitter scorer, Computer Cutting off machine , Double Facer are designed and assembled by ourselves, other standard machines : pre-heater, hydraulic mill stand , structure of convey bridge are purchased from professional manufacturers in famous brand to ensure the high quality.

Main technical parameter

  • Model : WJ150-1400-Ⅱ
  • Corrugated Line Length : About 80 meters
  • Design Speed :150m/min
  • Economic Speed: 3 Ply 90-130m/min, 5 Ply 80-120m/min.
  • Working Width: 1400mm
  • Corrugated Fluting: UV look like V type A flute C flute B flute E flute (choose the flute as you need)
  • Steam Pressure: 0.8-1.2Mpa
  • Air Compression: 0.6-1.0Mpa
  • Total Power: Approximately 240Kw
  • Direction of Operating: customer decides

 

No Name Quantity Description
1 YZJ1-1400 hydraulic mill roll stand 5 Sets Clip the paper , move left and right , lift up and down adopt hydraulic drive , the tension control adopts the single points brake. Clip the paper adopts inflated collect.
2 SZ-1400 trolley and rail 10 Sets The rail is 6 meters long
3 DW1-1400 Single Facer 2 Sets Corrugated flute A/C/B/E flute, it is confirmed as the customer parameter.No past fork negative pressure absorption type. universal shaft coupling independent gear drive, corrugated roller diameter is Φ320mm, the surface is hard chromed.Both the up and down corrugated roller seat are whole installation. Pasting glue roller seat can slide out as a unit. Quantity of cement adopts electric micro adjustment with a touch screen display. automatic track the corrugated line speed to adjust the glue thickness device.All electric part (low voltage electric part,inverter, PLC ) adopts Schneider.
4 XY1-1400 core medium Pre-heater 2 Sets The preheater diameter is Φ900mm. Electric adjustment for the heating area,the adjusting range is 60°~280°. The preheater cylinder driving by reducing speed motor.
5 MY1-1400 surface paper Pre-heater 2 Sets The preheater diameter is Φ900mm. Electric adjustment for the heating area,the adjusting range is 60°~280°
6 DY1-1400 Double Pre-Heater 1 Set The preheater diameter is Φ900mm.Electric adjustment for the heating area,the adjusting range is 60°~280°
7 TJ2-1400 Single Pasting Glue Machine 1 Set Roller pressure type, the height of the pressure roller adopt electric adjustment with pneumatic control , the thickness of the glue roller adopt electric micro adjustment with human machine interface. It adopts frequency independent control. It is equipped with break paper automatic detection unit , speed synchronous control match speed module ,the thickness of the glue adopt automatic control.
8 GQ3-1400 Single Overhead Convey Bridge 1 Set The lifting department adopt independent drive, automatic synchronous running, it adopt automatic aligner and automatically adjust paperboard neatly, on the bridge and ground two sets control
9 SM3-1400 Double Facer 1 Set 18 heating plates , the surface of the machine is grinding, adopts concentrated gravity roller press,pneumatic section adjustment , hydraulic automatic lifting . The cotton belt adopts pneumatic tensioning , the upper belt adopts automatic correcting the error , the under cotton belt adopts manual adjustment. The temperature of the heating plate shows in three position (former,middle,back) , the frequency motor with variable frequency control from Taiwan.
10 ZQY-1400 NC Slitter Machine 1 Set Slitting and scoring adopt inverter controlled with the synchronize speed of corrugated line, four slitters and six scorers,arrange orders and sharpening knives automatically controlled by computer,adopt three kinds of slitting size and adjustment of gap automatically with electric conversion. Control system and electrical components from Taiwan.
11 HQ2-1400 NC Rotary Cutting Off Machine 1 Set Servo motors imported from Italy,stored multiple groups of order,changed without stopping machine automatically or manually, feeding and sending blanks adopt frequency control,tracking the production speed automatically. Control system and electrical components from Taiwan.
12 DM1-1400 Manual Counting Stacker 1 Set Two sections of belt structure transfer vertically, tracking the production speed automatically. Manual counting and 90 degrees turning.
13 ZG -Ⅰ Steam System 1 Set Supply steam to each machine and dewater independently,unified backwater.
14 ZJX -ⅠGlue Making & Recycling System 1 Set Each using glue unit and glue storage unit adopt diaphragm pump automatically recycle
15 KY-ⅠAir Compressor System 1 Set Adopt two air compressors,one 1.0m3 air container and air filter to supply air, air compressors are supplied by customer.
16 DK3-ⅠElectric Control System 1 Set All electric components are from Schneider / Delta / Fatek these famous brands. The main drive motors adopt inverter control. The amount of glue and speed controlled by PLC,adjusted and displayed on touch screen. The corrugated line is equipped with display shows speed and operating condition all time.