Corrugated Cardboard Machine-WJ200-2000-Ⅱ5 Ply

WJ200 Series Corrugated cardboard carton and box making machine is high speed corrugated carton box production line, which can produce corrugated box 200m/min, achieving the top quality in China. WJ200 Series corrugated carton box machine is totally designed by Shengli Carton Equipment Manufacturing Group, which is the biggest and advanced corrugated machine manufacturer  in China. Over 30 years, we have exported hundreds of corrugated carton box printing machine, corrugated carton box folding gluing machine and corrugated cardboard production line to 20s countries.

WJ200-2000-Ⅱ5 Ply Corrugated Cardboard Machine

WJ200-2000-Ⅱ5 Ply Corrugated Cardboard Machine

Model : WJ200-2000-Ⅱ
Corrugated Line Length : About 60 meters
Design Speed :200m/min
Economic Speed: 3 Ply 140-180m/min 5 Ply 120-160m/min
Working Width: 2000mm
Corrugated Fluting: UV look like V type A flute C flute B flute E flute (choose the flute as you need)
Steam Pressure: 0.8-1.2Mpa
Air Compression: 0.6-1.0Mpa
Total Power: Approximately 280Kw
Direction of Operating: customer decides

No Name Quantity Description
1 YZJ2-2000 hydraulic mill roll stand 5 Sets Clip the paper , move left and right , lift up and down adopt hydraulic drive , the tension control adopts the double points brake. Clip the paper adopts inflated collect.
2 SZ-2000 trolley and rail 10 Sets The rail is 6 meters long
3 DW3-2000 Single Facer 2 Set Corrugated flute A/C/B/E flute, it is confirmed as the customer parameter.No past fork negative pressure absorption type. universal shaft coupling independent gear drive, corrugated roller diameter is Φ360mm, the surface is coated with tungsten carbide,service life is 26-30 million meters.Both the up and down corrugated roller seat are whole installation. Pasting glue roller seat can slide out as a unit. Quantity of cement adopts electric micro adjustment with a touch screen display. automatic track the corrugated line speed to adjust the glue thickness device.All electric part (low voltage electric part,inverter, PLC ) adopts Schneider.
4 XY1-2000 core medium Pre-heater 2 Set The pre-heater diameter is Φ1000mm. Electric adjustment for the heating area,the adjusting range is 60°~280°. The pre-heater cylinder driving by reducing speed motor.
5 MY1-2000 liner Pre-heater 2 Set The pre-heater diameter is Φ1000mm. Electric adjustment for the heating area,the adjusting range is 60°~280°
6 DY1-2000 Double Pre-Heater 1 Set The pre-heater diameter is Φ1000mm.Electric adjustment for the heating area,the adjusting range is 60°~280°
7 TJ3-2000 Single Pasting Glue Machine 1 Set Roller pressure type, the height of the pressure roller adopt electric adjustment with pneumatic control , the thickness of the glue roller adopt electric micro adjustment with human machine interface. It adopts frequency independent control. It is equipped with break paper automatic detection unit , speed synchronous control match speed module ,the thickness of the glue adopt automatic control.
8 GQ4-2000 Single Overhead Convey Bridge 1 Set The lifting department adopt independent drive, automatic synchronous running, it adopt automatic aligner and automatically adjust paperboard neatly, on the bridge and ground two sets control, electric system is from German, control system is from Taiwan.
9 SM4-2000 Double Facer 1 Set 18 heating plates , the surface of the machine is grinding, adopts concentrated gravity roller press,pneumatic section adjustment , hydraulic automatic lifting . The cotton belt adopts pneumatic tensioning , the upper belt adopts automatic correcting the error , the under cotton belt adopts manual adjustment. The temperature of the heating plate shows in three position (former,middle,back) , the frequency motor with variable frequency control from Taiwan.
10 ZQY-2000 NC Slitter Machine 1 Set Slitting and scoring adopt inverter controlled with the synchronize speed of corrugated line, six slitters and ten scorers,arrange orders and sharpening knives automatically controlled by computer,adopt three kinds of slitting size and adjustment of gap automatically with electric conversion. Control system and electrical components from Taiwan.
11 HQ2-2000 NC Rotary Cutting Off Machine 1 Set Servo motors imported from Italy,stored multiple groups of order,changed without stopping machine automatically or manually, feeding and sending blanks adopt frequency control,tracking the production speed automatically.Control system and electrical components from Taiwan.
12 DM2-2000 Computer Counting Stacker 1 Set Transferring horizontally, 90 degrees turning vertically by electric motor. Back baffle adjust and count stack finished board automatically, tracking the production speed automatically. Automatic cycle operation is controlled by PLC.
13 ZG -Ⅰ Steam System 1 Set Supply steam to each machine and dewater independently,unified backwater.
14 ZJX -ⅠGlue Making & Recycling System 1 Set Each using glue unit and glue storage unit adopt diaphragm pump automatically recycle
15 KY-ⅠAir Compressor System 1 Set Adopt two air compressors,one 1.0m3 air container and air filter to supply air, air compressors are supplied by customer.
16 DK3-ⅠElectric Control System 1 Set All electric components are from Schneider / Delta / Fatek these famous brands.The main drive motors adopt inverter control.The amount of glue and speed controlled by PLC,adjusted and displayed on touch screen.The corrugated line is equipped with display shows speed and operating condition all time.